Two component epoxy paint with UV filters, ideal for pool protection and decoration. It exhibits high resistance to pool water and chlorination chemicals. Ideal solution for building and polyester surfaces, which suffer from high mechanical stress and require chemical resistance.
Applies to swimming pools, tanks (non-potable water, dilute acids & alkalis), fountains and boats.
- Packaging: Metal containers, KIT (A+B)1kg
- Shade: RAL 9003 Signal White
- Appearance: Glossy
Specifications
- Appearance: Glossy
- Density (EN ISO 2811.01): 0.98-1.2 gr/cm³ (depending on color)
- Mixing ratio (by weight): 75A: 25B color,
- Yield: 250-330 g / m² for two coats (depending on the absorbency of the substrate)
- Drying time (25 °C): 2-3 h
- Coating time (25 °C): 24 h
- Pot life (25 °C): 1 hour
- Depth: 24h (Final polymerization of the material is achieved after about 7-10 days)
- Friction resistance: 57 mg (Taber test CS 10/1000/1000)
- Tensile strength: ≥2.5 N/mm²
Uses
- Swimming pools, tanks, fountains, boats
- Metalwork
Advantages
- Resistance to temperatures from -50 °C to + 140 °C (periodic resistance). Permanent strength from -20 °C to + 70 °C
- Contains UV filters
- Excellent resistance to fresh & sea water, dilute acids and alkalis
- Waterproof, anti-osmotic paint
- Increased resistance to chalk