Satin to matte ecological, water-soluble, plastic color ideal for all types of interior surfaces and especially for children's rooms, bedrooms, school buildings, hospitals, etc. It is suitable for closed spaces with little ventilation as it is almost odorless during application due to its very low content of volatile organic solvents. It shows high resistance to frequent washing and chalking.?Friendly to the environment and the user.
Product features
• High whiteness.
• Slightly satin to matte finish.
• Excellent coverage.
• High performance.
• Very good grip.
• Great resistance to frequent washing and rubbing.
• Ease of application.
• Almost odorless.
• Very low content of Volatile Organic Compounds.
• Meets the environmental requirements of the European Union eco-label system. (Register No. EL 07/001).
• Harmonized with directive 2004/42/EC.
Dilute with water at a rate of 10-15% by volume and then stir the product well before use.
Surface preparation
The surfaces to be painted must be dry and clean of any dust, grease, salts and old peeling paint. Any holes, cracks or unevenness in the wall must first be plastered with Berling's Acrylic Putty or Two-Component Spatula Putty. Apply the product by brush or roller after proper dilution. The application is carried out at an ambient temperature of 8 ° C to 35 ° C and a maximum relative humidity of 80%.
New surfaces
For perfect results on new surfaces, it is recommended to trowel the wall with Berling Two-Component Spatula Putty and then prime with Nature Aquafix Water Primer or Berling Water Fixateur according to the application instructions. Finally, Eco-Emulsion is applied in two layers. If you choose bold shades, for best results it is recommended to color the Berling Two-Component Stucco in the desired shade.
Old surfaces
On already painted but healthy surfaces without brittle spots, two coats of the product are applied after suitable dilution. In the case of stuccoed surfaces, it is necessary to sand them with sandpaper. They are then primed with Nature Aquafix Water Primer or Berling Water Fixateur and then the product is applied in two coats. Surfaces that have been chalked or covered with watercolors or whitewash need to be primed first with Berling's Nature Aquafix Water Primer and then Eco-Emulsion is applied in two coats.