VIMELAST Grey 5kg Spreadable roof sealant

Spreadable elastomeric roof sealant.

It has very good adhesion to all building materials. Forms after application a single, waterproof and durable membrane, without joints and joints. Its high elasticity bridges the displacements and cracks of the substrate.

Dilute with water.

Shades: white, grey, tile

Features / Benefits
Very good adhesion to any type of surface, such as concrete, plaster, bricks, metals, wood and sealants, except those containing solvents.
It has high elasticity, which can bridge the cracks
It reflects heat and contributes significantly to reducing the temperature.
It has great resistance to weather effects and time because it withstands ultraviolet radiation.
It does not require smoothness of the substrate.
Gives the simplest and safest solution to difficult sealing points (corners, edges, joints with roofing pencils).
It offers the greatest possible safety because the membrane that is created covers the entire surface without joints and joints, which are the problematic points of all other seals.
It is highly resistant to the effects of acids and alkalis in the atmosphere.

The substrate must be clean and solid, free of grease, loose materials (eg cement paste crusts), dust, etc.

The gaps in the concrete (nests, puddles) must be filled with ready-made VIMACRET resin cement mortar or with cement mortar with the addition of VIRESIN building resin.

Joints or cracks can be filled with VIMASTIC acrylic mastic or VIMACRYL SPACHTEL acrylic putty.

On porous surfaces, in order to achieve perfect adhesion of VIMELAST to the substrate, pre-coating (priming) with VIM-PRIMER primer is required (consumption approximately 200-300 g / m²). Priming can also be done with VIMELAST diluted with water in a ratio of 1: 1. Above old asphalt, coatings are recommended the priming with the solvent primer VIM-PRIMER-S (200 g / m²).