Acqua Primer (A) 5kg & (B) 2kg Primer for porous surfaces

Acqua Primer is a suitable coating for sealing on highly porous surfaces, for stabilizing concrete surfaces, to prevent dust, but also for priming on surfaces that will be coated with various paints or systems (epoxy, polyurethane, polyurea, etc.).

It is indicated in cases where the presence of solvents is undesirable or should be avoided. Can be safely applied to substrates from completely dry to moisture up to 6% (not rising).

Packaging: Set of 7kg in plastic containers (in the predetermined mixing ratio of A & B components by weight).

• Appearance Glossy, transparent, yellowish
• Density (EN ISO 2811.01), Component A: 1.02 g / cm³, Component B: 1.13 g / cm³
• Mixing ratio (by weight) 100A: 40B
• Drying time (+ 25 ° C) 6 hours
• Pot life (+ 25 ° C) 1 hour
• Repaint time After 24 hours (+ 25 ° C)
• Application temperature + 12 ° C to + 35 ° C
• Walkability 24 hours (+ 25 ° C)
• Acquisition of full hardness ~ 7 days (+ 25 ° C)
• Adhesion resistance ≥2.5 N / mm²
• Consumption 120-160gr / m², for one layer (depending on the absorbency of the substrate)

• Two-component epoxy water-based primer with high hardness, resistance to abrasion and chemicals (alkalis, dilute acids, water and several solvents).
• Harmonized with Directive 2004/42 / EC on the use of organic solvents in decorative paints and varnishes.
• It is classified as SR-B2.0 according to standard EN 13813.