BIS BOND FIBER 100 25KG Welding mortar and coating of thermal insulation boards

BIS BOND FIBER 100 is a particularly easy-to-work cement mortar of suitable grain size, enriched with
synthetic resins, fibers and special additives.

• It is suitable for welding and in combination with the anti-alkaline glass mesh BIS FORTE 160 gr, the smoothing of thermal insulation boards made of expanded (EPS) or extruded (XPS) polystyrene in external thermal insulation systems.
• Suitable for almost all common substrates.

Technical Data

• Product Identity
• Powder form
• Grey colour
• Chemical base Portland cement, aggregate, special additives
• Granulometry Dmax 0.6 mm
   
• Apparent weight 1.4 ± 0.1 kg / L
• Application Data (+ 23 ° C & 50% relative humidity)
• Mixing ratio 6.0-6.5 L of water per 25kg
• Specific weight of mixture 1.5 ± 0.05 kg / L
• Shelf life 4 hours
• Application temperature from + 5 ° C to + 35 ° C
•  
• Final Performance according to EN 998-1: 2016
• Compressive strength ≥ 6 N / mm2
• Adhesion ≥ 1.0 N / mm2
• Capillary water absorption ≤ 0.20 kg / m2; min0.5
• Water vapor diffusion coefficient (μ) μ ≤ 15
• Thermal conductivity coefficient (λ10, dry, mat) 0.45 W / mk
• Reaction to fire A1

BIS BOND FIBER 100 is suitable for bonding thermal insulation boards such as:
• Expanded and extruded polystyrene
• For smoothing and coating thermal insulation boards and creating a substrate for:
• Organic and inorganic plasters
• Decorative coatings TOP DECOR , GRAFFIATO , GESSO
For installation on a variety of substrates such as :
• Concrete, cement mortars and brickwork
• Masonry plasters and mortars
• Cement boards and plasterboards (with a suitable primer)