FLEX2000 25kg-Ελαστική Ενισχυμένη Ρητινούχα Κόλλα Πλακιδίων

White, cement-based, all-type tile adhesive, based on high-strength Portland white cement (I-52.5), reinforced with polymer resins, selected dionysus white marble aggregates and special additives to improve tile adhesion in difficult, non-absorbent surfaces where elastic and strong welding is required. It has proven to be particularly resistant to wet environments and with high frost resistance.

European Standard EN 12004 (C2TES1)

• Color: White
• Detachment resistance (EN 1348):
• In concrete after 28 days:> 1.75 N / mm²
• After heating to 70 ° C:> 1.5 N / mm².
• After immersion:> 1.25 N / mm².
• After 25 cooling-defrost cycles:> 1.2 N / mm².
• Slip (EN 1308): <0.5 mm.
• Transverse deformation (EN 12002): 4.0 mm (S1)
• Open application time: 30 - 40 minutes.
• Minor correction time: 10 minutes.
• Application temperature: + 5 ° C to + 35. C.

Uses
Strong welding of tiles of all types such as: ceramic, porcelanato, tiles of low and zero absorbency, marble and granite, glass products, mosaics, Karystos tiles or other natural materials. Application on any substrate plaster, concrete, aerated concrete, on floor or wall, indoor or outdoor, even on heated floors with underfloor heating, jacuzzi, hammam, swimming pools. For application on drywall, they must be preceded by priming with acrylic water primer MARMOLINE MST 11. For application on mosaics, old marbles or tiles, it must be preceded by surface priming with quartz adhesive primer MARMOLINE PRO CONTACT.
Advantages

• Particularly strong welds with elastic characteristics
• No slippage of the tiles is observed during their installation
• High resistance to temperature fluctuations (heat-cold) and humidity
• Incomparable quality of raw materials
• Ease of application
• Excellent workability
• Internal and external use