#andreoyacademy - Adhesive sealing tapes

Seal with self-adhesive sealing tapes yourself, with the instructions from  #andreoyacademy

Bande Adealu  &  BM-ALU TAPE adhesive waterproofing tapes  are a versatile waterproofing material used in many applications, from gutters, parapets, chimneys, pipes, to construction details on all types of substrates (concrete, wood, metal, plastic, glass, etc.). 

You can find self-adhesive sealing tapes in aluminum, black and tile colors, in 10m long rolls and in the width you desire.

Installing the self-adhesive asphalt waterproofing tape can be done easily and quickly even by you, as long as you follow the instructions of #andreoyacademy .

Deal with water inflow from rain or waterproofing problems in your home immediately and effectively!

Why install the bitumen waterproofing tape yourself?

• Saving time and money: By doing the sealing and waterproofing yourself, you save on the cost of professionals and it also saves you time from finding them.
• Personal satisfaction: Completing a task with your own hands offers a sense of accomplishment.
• Complete control: You have control over the sealing process and can ensure the best possible result.

What you will need:

• Self-adhesive asphalt tape Bande Adealu  or  BM-ALU TAPE (in the color and width you desire)
• Scissors or cutter
• Tape measure
• Bitulat Primer solvent-based bituminous varnish
• Brush or roller
• Pressure roller

Seal and waterproof yourself with adhesive sealing tapes!

1. Surface preparation:

• Clean the surface thoroughly of dust, dirt, grease or other impurities.
• Any loose materials and older coatings must be carefully removed by appropriate mechanical (scraping) or chemical means (erosives).
• The surfaces must be sufficiently smooth, flat and continuous (i.e. without holes, cracks, etc.). Otherwise, they must be repaired with appropriate repair materials that we will recommend to you depending on the case.

2.Priming:

• Before applying the Bande Adealu  or  BM-ALU TAPE bitumen tapes , it is recommended to apply the solvent-based bitumen varnish Bitulat Primer , with a brush or roller in one layer.

3.Measurement and cutting:

• Carefully measure the surface where you will place the asphalt strip.
• Cut the asphalt strip to the desired length, leaving a little margin (about 1-2 centimeters) for any errors.
• Use scissors or a utility knife to cut the asphalt strip. Try to cut in a straight line for best results.

4. Application of the asphalt strip:

• Remove the silicone protective paper, starting from one edge.
• Place the bitumen tape on the surface, starting from one edge and gradually pressing towards the other to achieve a strong bond.
• It is recommended to use a pressure roller to avoid air being trapped under the film.
• In case the ambient temperature is <+15°C, heating with a blowtorch is recommended to strengthen the bond.

5.Finish:

• Check the asphalt strip for any imperfections or problems.
• If there is any glue residue, you can remove it with a cloth and a little detergent.

Tips and tricks:

•     #andreoyacademy tips:  If there is a need to connect two strips, they should overlap by at least 5cm.
•     #andreoyacademy tips:  If the surface has corners or curves, you can use a blowtorch to soften the bitumen strip and make it fit better.

Conclusion: Installing self-adhesive bitumen tape is a simple and economical solution for many sealing and waterproofing applications. By following the instructions above from #andreoyacademy , you can install the tape yourself and achieve a professional result.