Sikaflex®-111 Stick & Seal is a 1-component, multi-purpose, adhesive and sealant with a particularly wide range of applications on a multitude of surfaces in construction.
Adheres and bonds most construction materials and is suitable for indoor and outdoor use.
- Adheres well to a variety of substrates without the need for prior primer application
- Adheres to fresh concrete
- Compatible with most bituminous substrates
- Shore A hardness: ~36 (after 28 days) (ISO 868)
- Tensile strength: ~1.5 N/mm2 (ISO 37)
- Measure of elastic deformation: ~0.65 N/mm2 at 60 % strain (23 °C) (ISO 8339)
- Elastic reset: ~75 % (ISO 7389)
- Tear transmission resistance: ~4.5 N/mm (ISO 34)
- Operating temperature: -50 °C min. / +80 °C max.
Joint design
- The joint must be designed to suit the required mobility of the sealant. The joint width must be ≥ 6 mm and ≤ 20 mm. A width to depth ratio of approximately 2:1 must be maintained.
- Joints ≤ 10 mm wide are intended for shrinkage control and are therefore non-moving joints.
- For larger width joints contact Sika Technical Department for more information.
Uses
- As an adhesive for welding on most common materials in construction:
- Concrete
- Masonry
- Most of the rocks
- Ceramics
- Wood
- Metals
- Glass
- Plastics such as PVC, PA, PET and EPS/XPS
- As a sealant for sealing horizontal and vertical joints.
Advantages
- Adheres well to a variety of substrates without the need for prior primer application
- Adheres to fresh concrete
- Compatible with most bituminous substrates
- Good mechanical strength and weather resistance
- Sealant-adhesive with CE mark
- Colour: Gray concrete